Quality Tools
Use these tools alongside your 5S system to investigate issues, document corrective actions, and drive continuous improvement.
Starting with 5S?
Set up your 5S system first — then use these tools to follow up on the issues your operators find.
Browse by Industry
Start with tools tailored to your operating environment.
Statistical Analysis
Use after a 5S check finds a measurement or process stability issue.
SPC Quick Check
Enter measurements and instantly see Cp, Cpk, and control charts
Attribute Chart
Track defect rates with p, np, c, and u control charts
Pass/Fail Predictor
Train AI on your inspection data to predict if new parts will pass or fail
Before/After Analysis
Did your process change improve quality? Find out with statistical proof
Root Cause & Corrective Action
Use when a 5S issue needs deeper investigation or formal corrective action.
Root Cause Analysis (Ishikawa)
Identify the true root cause with a simple, guided fishbone diagram
5 Whys Analysis
Find the root cause of quality problems with guided 5 Whys investigation
NCR Generator
Create a clean, professional Non-Conformance Report in seconds
CAPA
Document corrective and preventive actions with a structured 7-step CAPA report
8D Problem Solving
Structured 9-step 8D report for complex team-based quality problems
FMEA Lite
Build a practical FMEA with AI-assisted analysis, Action Priority scoring, and risk matrix
Operations & Inspection
Structured checklists and AI-assisted forms to complement your 5S checks.
Inspection Forms
Design reusable inspection checklists and share them with your team
AI Form Builder
Describe what you need and AI creates your form instantly
Smart Start
Paste your data and AI recommends the best quality tool, then pre-fills it for you
Downtime Log
Track machine downtime over time and prioritize losses with Pareto analysis
Traceability Test
Run audit-ready lot traceability exercises with backward/forward trace and mass balance
Cost & Risk
Quantify the financial impact of quality failures and prioritize improvements.